Solar Hybrid UPS Power Generating System with MPPT is Double Conversion with Load Sharing Technology. This is one of the advanced technology in the market to utilize 100% of Solar PV Generated power by enhancing Solar Power through MPPT Load Sharing and current control technology which can be used for sensitive, sophisticated and industrial loads.

The output load is completely isolated from input by using Double conversion technology and also our Solar UPS Out power is constant for 24/7 without any fluctuation.

The Solar power is utilized maximum level even during cloudy season. The priority is always for Solar Power. Solar Power and Electric Board(EB) Power will be paralleled and will work together but always priority is for the Solar Power. After utilizing Solar Power still if load required more than Solar generated power. Our Solar UPS Smart Dual Sharing technology will allow EB Power to feed the power to Inverter Input. So Output load is protected with Uninterrupted Clean Power.

• Works on Double Conversion Technology. No Need to Connect Stabilizer to your load
• It has Battery backup Facility. No need to have one more UPS for your Critical load During Power Cut
• 100% Income Tax, Depreciation on our Solar hybrid UPS
• 10 to 15% Per Annum Savings on your Investment on our Solar hybrid UPS in terms of Savings on Commercial Electrical Bill.
• ROI Within 7-8 Years.  Next 10 to 12 Years Solar Power Free of Cost

• DSP based control guarantees high reliability
• Pure Sine Wave output
• 30% More energy is harvested by using MPPT solar charger
• Auto opriority logic in the charger for both mains and solar inputs
• If the load is less than 5W, the inverter automatically switches to sleep mode to save power
• Compact and light weight
• User friendly installation
• High efficiency and extended backup time
• Normal and Computer mode<
• Noiseless operation of fans, lamps and Home
• Liquid crystal display

During Day time, Solar Hybrid UPS will work as Solar Power generating System which will generate the power by using Sunlight through Solar Photo Voltaic Modules priority will be for Solar Energy. When Solar Power is available our Solar Hybrid System will charge the battery completely through Solar Charger. The MPPT Charger will enhance the Solar power by 15 to 30% Once Battery is fully charged based on availability of SPU Power. It will supply the Solar Power to output load without any interruption by switching of the EB Power to ensuring 100% utilization of Solar Power so you need not depend on EB Power. When Sunlight power is not available this will reconnect the EB Power to ensuring the uninterrupted power supply. Even during power cut, in the night the stored Solar Power from the Batteries can be utilized as backup power.

DESCRIPTION	SOLAR SINEWAVE UPS TECHNICAL SPECIFICATION
TECHNOLOGY	DSP Based PWM MOSFET/IGBT
CAPACITY	1 KVA to 3 KVA
INPUT Voltage	175V – 265V AC for Computer 100V – 300V AC for lighting
Transfer Time	< 10ms
Wave Form	Pure Sinewave
Frequency	50Hz+/0.5Hz
Efficiency	> 96%
Output Voltage	225V +/- 1% (on Battery mode)
Power Factor	0.8 Lag
Charger on Mains	DSP Based Technology Trigle cum float Charger
Charger on Solar	Intelligent Maximum Power Point Tracking (MPPT) technology
Battery Charging Current	Up to 30A (On Solar)
Peak charger efficiency	97%
Short Circuit	> 300% load(short circuit with Manual Reset Funcion)
Indication /LCD Display	Mains on, Mains Charging, Solar Charging, Inv On, Battery Low, Overload
Alarms	Battery Low, Over Load, Mains Failure, Short Circuit
Protection	Mains and Solar High and Low Voltage, Short Circuit, Battery deep discharge and over charge
Type of cooling	Forced Air Cooling
Noise level	Less than 60 db
Crest Factor	Up to 3:1
Withstanding capacity	125% up to 60 Seconds
Battery Voltage	1KVA / 24V DC …. 3 KVA / 48V DC
Operating Temp	0 – 500C